Our new look
I guess I forgot to add a picture of the final result. Here she is in all her glory! We are so happy with the end result, it really made a huge difference in the appearance of our coach.
I really like the look by adding the front side slanted windows from a Model 10. They fit perfectly on our 01.
I got to make some sawdust this past week adding some red oak moulding and make up a cabinet frame for our towels. This was the last thing to do on the inside of our coach.
We had some plastic silver paneling left over from our bedroom that was used on the curved part of the ceiling, so I put it to good use. It really made a difference in the appearance. The light over the toilet is 12 volt, while the sink lighting is 120.
We have a pocket door that separates the bathroom and bedroom from the front half of the coach. I designed the bathroom that way to give us more room, I hate small cubby holes for a sink and toilet. Ours is very open and easy to get around in. We do have a curtain between the bathroom and bedroom for additional privacy if needed. There is a Fantastic Fan above the sink and toilet area for ventilation. To the side of the cabinet there is a switch to activate a 12 volt water pump while boondocking.
I really enjoyed this part of our build. It’s always enjoyable to come up with an idea and see the end result.
Silver Panel on Curved Ceiling
Red Oak Cabinet Frame
Red Oak Moulding and Trim around Mirrors
Red Oak Moulding and Trim
I thought I would share some information that I hope is helpful. I sanded the entire bus with 320 grit using a DA sander. I bought the sandpaper at Harbor Freight, trying to save a few bucks. The last batch I got from my paint supplier here in Abilene. The cost was a little over double for the same count, 100 on a roll. They are PSA (pressure sensitive adhesive) discs. My experience was this. I should have used them from the beginning. They last over 5 times longer and don’t plug up. End result, better finish in much less time. The box shows holes in them, mine was a solid pad, therefore no holes. I guess they use the same picture on all of their sanding products.
I was able to polish the mirrors and install them along with painting the wiper arms a satin black. She is starting to look like an Eagle now!
We had a very severe hail storm on Thursday evening that did significant damage to parts of Abilene. Hail as large as a tennis ball were reported. Parts of Abilene just got rain, we got hail! I’m estimating that this stone was much larger as we didn’t arrive home until 45 minutes after the storm had left the area. Can you imagine the damage it can cause, Wow!
We did incur some to the bus. Several dents on the roof, barely seen from the ground. Roof marker light destroyed along with a marker light lens on the rear cap, our front and middle A/C shroud did not survive. They were very old and brittle, they will get replaced. I fixed the marker lights, will leave the dents alone for now, may not even worry about it.
I tried to clean off the silicone from a previous owners installation and failed, broke 3 or 4 light assemblies in the process.
Why anybody would do this is beyond me.
I did install new side marker lights/turn signals, both sides. I chose Grote LED’s to improve the functionality and brightness of them.
Here they are in action. I had one license plate light out, it has been replaced so all lights are operational! Yay!
It’s time to compare the before and after shots of our Eagle. We are very pleased with the outcome after many, many hours of work. There are a few things not finished, mirrors polished and installed, awning attached and final detail.
It looks completely different than when I first purchased it back in 2003. A huge difference than when The Dixie Echoes owned it. I’ll try to put together more before and after pics, at a later date, from my archives to show the transformation.
All beat up
A new look
All naked and ugly
All pretty now
What a day yesterday! I got everything masked and covered to prep for primer. I decided to go ahead and prime both sides and the front. It was a long day! I had to cover the freshly painted white on the roof, finished masking for the second time the passenger side windows. The first set got blown off last week during a storm. Painting in the great outdoors has it’s downsides here in West Texas. I pulled the front windscreen lock strip so I could get fresh paint under the seal. I used Windex to clean the rubber so the tape would adhere to the surface.
I moved the scaffold around the bus three times yesterday. That is a chore on gravel and an uneven surface, I was pooped!
Here is a couple of shots, one of me painting the last section of blue and the other is me mixing up a batch of primer. Becky took these as she was my helper. She got the visor ready for primer and helped with the air hose while I moved around the bus.
I will spray the final white today and then start unwrapping the bus. We are anxious to see the final result!
I finished wrapping the bus, front and rear, so I could tackle the roof. I sprayed primer and two coats of white. It came our great! A perfect day to “Git Er Done”!
Tomorrow is supposed to be nice also, very little wind and temps in the low 80’s. We’ll see what’s next!
I should have picked a smaller project, huh!
Curved roof is now white.
I was finally able to spray the rear of the bus with primer and Olympic White paint yesterday. It came out better than expected, nice and shiny. I am so happy as this is the first time the rear of the bus has had paint on it since I stripped it 7 years ago. I am relieved that the original 01 tail light holes came out so good. I had to do some repair work to cover them up. The previous party that did the work used cardboard and bondo to do the patch work. This time we welded aluminum pieces in and did it correctly. I’m also showing the Model 10 window on the passenger side. They will really add in the appearance to the overall look. The most challenging part of preparing yesterday was fighting the wind trying to secure the plastic to protect the coach from any over spray.
I really wanted to continue with priming and painting the curved roof today, but the temps stayed in the lower 60’s. Hopefully tomorrow that will get done.
Silver Eagle Model 10 Windows
Rear Cap Driver Side
Rear Cap Passenger Side
Yesterday was a beautiful day for painting. Temps were in the low 70’s and the wind was very calm. I layed the red on the front and passenger side and it came out very good. Now that the striping is finished I can cover it up in a day or so and start priming and spraying on the white. I’ll do it in sections due to the size of the project. We’re getting closer!
Here is what the blue and red looks like against all of the ugly paper, plastic and masking tape.
Blue and Red Metallic Striping
This shows what it looks like up close
I was finally able to spray some paint yesterday. It’s been a long time coming, but worth all of the work. We also were able to find some front side windows off of a parted out Silver Eagle Model 10 to replace the original ones. These are so much nicer, tinted and tilt out from the bottom. It will add a new dimension to the appearance of the coach.
I hope to add a red metallic stripe centered in the blue today. It might not happen though, we had a severe storm last night with very high winds. I’m sure the paper covering the coach took a hit. We’ll see what it looks like at daylight.
Here are some pics to show the progress.
Blue Metallic on Banding
New Windows from a Model 10 Eagle